Home  »  Tech Support2

433.92mhz fixed code and rolling code duplicator remote control

D4-type Remote control duplicator

The chipset compatibility:

2260(All the manufactures)

2262(All the manufactures)

PT2264,5326(All the manufactures)

SC5262,HT600,HT680,HT6207,HT6010,HT6012,HT6014,SMC918 Series,527(All the manufactures)

1527(All the manufactures)

2240(All the manufactures)

Parts of single chip

Some 433Mhz Rolling code brand remote control type:

BFT

BENINCA

DOORHAN

NICE FLOR

HORMANE  ECOSTAR

V2

FAAC

KEY

GGRA1

GBD

NICE SMILO

ECA

MOTORLINE

DEA

PECCININ

CENTURION

CAME

FADINI

 

Here is the way of copy

Memory clearance

1. Press button 1 and 2 simultaneous until LED flashes 3 times

2. Release button 2 (Keep pressing button 1),and press button 2 slowly for 3 times,LED flashes quickly.

3. Release both button,the duplicator is ready for copying.

 

Duplicating

Put duplicator aside of original transmitter, as close as possible.

 

Fixed code remote control

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes means the duplicating succeed.

Repeat above step to the rest buttons.The duplicator will work after duplicating.

 

Rolling code remote control

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes means the duplicating succeed.

Once 1 button duplicated,the rest buttons will generate automatically,please follow original receiver manual to insert the new duplicator on the receiver.

 

Resume

If you erase the code by mistake,you can resume it by pressing and hold both of the “3” and “4” button on the remote controllers at the same time,after 10 seconds,the LED flashes 2 times and turn off which indicates the code of the copy remote controller is resumed.