Home  »  Tech Support1

DEA rolling code remote Manual


 DEA rolling code remote program

RECEIVER WITH NO LCD SCREEN

1. Open the casing of your receiver box. it can be found next to yourmotor.

2. Press the programming button on the circuit board of the receiver andthen let it go (button ENR, MEMO, PROG, or RESET, depending on themodel).

3. The LED light on the receiver lights up or blinks.

4. Press a button on your new remote control for 1 second.

5. Let the button go. The LED light on the receiver goes out immediately or in the following 10 seconds depending onthe model.

6. Your new remote control is programmed.Repeat for more remotes.

RECEIVER WITH A DIGITAL SCREEN

1. Open the casing of your receiver box. It can be found next to your motor.

2. Press the buttons + or – on the receiver circuit board until you see the entry P005 on the digital screen.

3. Press OK. The LED lights up.

4. Press a button on your new remote control for 1 second

5. Wait 10 seconds.

6. Your new remote control is programmed.Repeat for more remotes.

DELETING REMOTES

Press the programming button on the circuit board of the receiver for 8 to 10 seconds and then let it go (button ENR,MEMO, PROG, or RESET, depending on the model). All remotes are now deleted